Specifications ñ Audio Power Amplifier Type 2716-C

MAXIMUM OUTPUT POWER

Load EIA @ 1 kHz and 1% THD
8 Ω stereo 110 W
4 Ω stereo 160 W
2 Ω stereo 200 W
8 Ω bridged 320 W
4 Ω bridged 400 W

SPEAKER PROTECTION
Short-circuit, DC, VHF a thermal protection is provided
FREQUENCY RESPONSE (8 Ω, 1 W)
20 Hz ñ 20 kHz: +0, ñ1 dB
INPUTS AND OUTPUTS
Gain: 30 dB ± 1 dB
Input Attenuator: 0 ñ 30 dB in 6 dB ± 0.3 dB
steps
Impedance: 20 kΩ
Common Mode Rejection: 50 dB@1 kHz
Slew Rate: 25 V/μs
Output Impedance: 0.03 Ω
Hum and Noise: More than 105 dB below
max. power
Channel Separation: 70 dB@10 kHz
FRONT PANEL
Gain Controls: 2 ñ channels, A and B
Clip Indicator: 2 red LEDs, fast peak and
slow release or shorted output
Protection Indicator: 2 yellow LEDs, 80°C
at heat sink or 12 kHz at full power
Present Indicator: 2 green LEDs, ñ 25 dB at
input
On Indicator: 2 green LEDs, DC rail voltage
for channel A and B
REAR PANEL
Input Connectors: Two XLR-type, 3-pin
female (pin 2+) and 1/4″ jack
Output Connectors: Two NeutrikÆ, 4-pin,
SpeakonÆ sockets
Link: Stereo ñ Link/Bridge A + B
Clip Limiter: On/Off
POWER REQUIREMENTS
Voltage Selector: 230 V/115 V
DIMENSIONS
W × H × D: 48.3 × 4.4 × 28.0 cm
(19 × 1.7 × 11 inches)
WEIGHT
7.5 kg (16.5 lb.)

Type 2716-C-001 Audio power amplifier (no accessories)