리퍼비시 계측기

리퍼비시 계측기

AMU200A – B13 B14 B17 K62

  • ModelAMU200A
  • MakerR&S
  • DescriptionBaseband Signal Generator and Fading Simulator
  • OptionB13 B14 B17 K62
  • Rental문의요망
  • Stock문의요망

Growing cost pressure is leading to ever
increasing modularization in the design
of modern communications equipment and systems. To launch products
as early as possible, complex tests are
being­ ­performed at the module level
long before integration into the overall product­ or system takes place. This
increases test requirements at the baseband level.

The universal ¸AMU200A baseband
generator has been specially devised for
this task. It combines the functionalityof a realtime I/Q source, an arbitrary
waveform generator, and a channel
simulator in a single unit.
The optional two-path functionality
makes it easy to generate even complex
signal scenarios. You can simulate interference, noise, multipath propagation,
and antenna diversity. Plus, you can
determine their effect on a device under
test (DUT) reproducibly, with minimum
effort, and with a single unit.

  • Scalable platform
    • Up to two complete baseband paths
    • Configuration as a fading simulator, I/Q source, or all-in-one instrument with fading and signal generation
    • Baseband generators with universal coder for realtime signal generation
    • Arbitrary waveform generators with 16 Msample, 64 Msample, or 128 Msample memory
    • Analog single-ended, analog differential, and digital baseband outputs
    • Up to two baseband inputs (analog/digital)
    • Combination of up to four baseband signals in the digital domain (e.g. for testing multistandard base stations)
  • High signal quality
    • 40 MHz I/Q bandwidth with flat frequency response of typ. 0.03 dB
    • Excellent ACLR performance of typ. +78 dB with 3GPP FDD (test model 1, 64 DPCH)
    • Wideband noise of typ. –155 dBc
    • Low inherent EVM
  • Unmatched flexibility
    • Support of a multitude of digital standards, including GSM/EDGE, 3GPP FDD, HSPA, CDMA2000®, TD-SCDMA, WLAN, WiMAX, DVB-H, GPS, EUTRA/LTE
    • Four code channels in realtime for 3GPP FDD
    • Change of modulation from slot to slot for GSM/EDGE
    • Multisegment waveform mode for fast signal switching
    • Arbitrary waveform generator supported by R&S®WinIQSIM2TM simulation software
    • Pulse generation with the pulse sequencer option from Rohde & Schwarz
    • Direct waveform transmission via MATLAB®
    • Internal 40 Gbyte hard disk as standard for storing waveforms and modulation data
  • Fading and interference simulation
    • Dual-channel realtime fading simulator
    • Up to 20 taps per channel
    • Time resolution down to 0.01 ns
    • Profiles for static and dynamic fading scenarios
    • Additional noise simulation
    • Optimal suitability for diversity tests
  • Intuitive operation
    • Color display with 800 × 600 pixels (SVGA format)
    • Intuitive user interface with graphical display of signal flow (block diagram)
    • Graphical display of baseband signals through built-in transient recorder
    • Context-sensitive help system
  • Connectivity
    • Remote control via GPIB and LAN
    • USB connectors for keyboard, mouse, and memory stick
    • VGA connector
    • User-selectable trigger and marker signals

B13:baseband main module must be installed

B14:Fading Simulator

B17:Baseband Input (digital/analog)

K62:Additive White Gaussian Noise (AWGN)

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *


    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.