리퍼비시 계측기
리퍼비시 계측기
EX200
- ModelEX200
- MakerEllisys
- DescriptionCompatible with all three USB 2.0 speeds
Automatic detection of the Link Under Test speed
Measurement of USB bus states and low level protocols
Highly affordable permitting to supply each developer with one unit
Non intrusive analysis
Small and robust enclosure, powered by the USB bus
Perfect for off-site interventions
Download of the analyzed data in real time with a high speed USB 2.0 connection
Scalable design of the hardware
Powerful hardware trigger
Display of transactions and transfers layers
High level decoding of standard requests and descriptors
High level decoding of classes requests and descriptors
Powerful display filters
Exportation of analyzed data to several formats (XML, text, raw, etc.)
Didactic display with reference to the specification
Software development kit available
Free viewer software - Rental문의요망
- Stock문의요망
- Pentium 4, 1 GHz or compatible processor
- 512 MBytes of RAM
- 1024 x 768 display resolution with at least 256 colors
- USB 2.0 host controller
- Windows® 2000 Service Pack 4 or higher, Windows® XP Service Pack 1 or higher
- Internet Explorer 5.0 or higher
Enclosure
- Width: 150 mm (5.91 inches)
- Length: 120 mm (4.72 inches)
- Height: 65 mm (2.56 inches)
- Weight: 750 g (1.7 pounds)
Analysis Computer connector
- USB 2.0 high speed (480 Mbit/s)
Link Under Test connectors
- USB 2.0 high speed (480 Mbit/s), full speed (12 Mbit/s) and low speed (1.5 Mbit/s)
- Automatic speed discovery of Device Under Test
Trigger connector
- Type: BNC
- Input: 5V max, 1Mohms
- Output: 3.3V, max 20mA
- Absolute maximum ratings: -0.5V .. +6.5V, 50mA
Indicators
- Power: illuminated when the analyzer in powered on
- Activity: illuminated in green when packets are detected (in red when they are recorded)
- Trigger: illuminated in green when a trigger is detected on input (in red when detected in output)
Memory
- 32 MBytes of FIFO memory
- Analyzed data is transmitted continuously
Bus analysis
- Timestamp: 16.67 ns (60 MHz) precision
- Low-level errors: detection of bit-stuffing, CRC5 and CRC16 errors
- Bus states: detection and measurement of Reset, Suspend, Keep Alive and High Speed Handshake states
Power Requirements
- Powered by the USB bus of the Analysis computer
- No external power supply needed
Hardware update
- The decoding engine and firmware are automatically updated with each software release
Product Warranty
- Two years limited warranty
Ellisys reserves the right to change the features and specifications of the product without notice.
