리퍼비시 계측기
Functionality
Performance
Measurement Applications & Software
Automation & Communication Interface
The PXA signal analyzer is the highest-performance member of the X-Series and is the evolutionary replacement for your current performance signal analyzer. It provides frequency coverage up to 50 GHz and ensures present and future flexibility through optional measurement capabilities and hardware expandability. Through external mixing with Agilent or third-party harmonic mixers, the PXA can measure signals to 325 GHz and beyond. The PXA’s advanced performance, flexibility, capability, and expandability enable you to address demanding applications in aerospace, defense, commercial communications and more. In addition, the PXA includes extensive remote language compatibility features that make it easier to replace existing Agilent performance spectrum analyzers.
With the performance and flexibility of the PXA, you’ll be equipped to create state-of-the-art original designs. Unravel complex signals through the PXA’s broad set of measurement applications and demodulation capabilities, such as the Keysight 89600 VSA software and MATLAB. Adding real-time spectrum analyzer capabilities is an upgradable option for new and existing PXAs, enabling you to see, capture and understand fleeting, close-in signals at very low levels.
The PXA is ideally suited for high-performance R&D applications in aerospace & defense and commercial wireless communications. The PXA analyzes signals over wider bandwidths, reduces measurement uncertainty and reveals previously hidden signals with Noise Floor Extension.
NFE technology provides a dramatic improvement in the PXA’s ability to accurately measure low-level signals approaching the theoretical “kTB” noise floor. NFE reduces the measurement noise by up to 10 dB and more. With increased averaging, the PXA’s effective noise floor can be extended by up to 10 dB because 90% or more of the contributed noise power is predictable, which means it can be measured, calibrated and then eliminated during normal measurements.
Even at the extremes of signal analysis, your high-performance analyzer should be ready for anything. That’s why we offer real-time spectrum analysis as an upgradable option for new and existing PXAs. With real-time spectrum analyzer capabilities, the PXA offers the widest analysis bandwidth and dynamic range to ensure maximum probability of intercept (POI). And for even deeper analysis and thorough characterization of complex signals, a real-time PXA can also be equipped with the Keysight 89600 VSA software. See, capture and understand the most elusive signals—known or unknown.
Every PXA also includes I/Q analyzer functionality and Keysight PowerSuite. It allows viewing of magnitude, phase, or I/Q behavior for complex modulated signals over the maximum available analysis bandwidth. PowerSuite provides a wealth of one-button, standards-based power measurements such as TOI, harmonic distortion and burst power.
205 | Basic VSA-lite |
---|---|
235 | Pre-amplifier |
333 | X-Series analyzer connectivity |
3FP | Amplitude correction and limit lines |
4FP | TOI and harmonics |
503 | 9 kHz to 3.0 GHz Frequency Range |
507 | Frequency range, 9 kHz to 7.0 GHz |
513 | Frequency range, 10 Hz to 13.6 GHz |
526 | 20 Hz to 26.5 GHz |
550 | Frequency range, 3 Hz to 50 GHz |
5FP | ACP 18 Carrier |
6FP | TV Trigger and IQ Analyzer |
AYA | Vector modulation analysis |
B1X | Increase analysis bandwidth from 10/25 to 160 MHz |
B25 | 25MHz Maximum bandwidth |
B40 | 40MHz Maximum bandwidth |
BBA | Baseband Analog I/Q |
CRP | Arbitrary IF output |
DP2 | Digital processor with 2 GB capture memory |
EA3 | Electronic attenuator (Frequency range 20 Hz to 3.6 GHz) |
EDP | Enhanced display package |
EMC | Basic precompliance EMI features |
EP1 | Enhanced Phase Noise Performance |
EP3 | Enhanced phase noise |
EP4 | Enhanced phase noise performance, CXA |
ESC | External source control |
FS1 | Fast sweep capability |
FSA | Mechanical attenuator, 2 dB steps, 0 to 70 dB |
LFE | Low Frequency Enabled (allows frequency range to 3 Hz) |
LNP | Low noise path |
LOT 747242 | PC6, SSD, W10, 526, B25, EMC, FS1, N9060A-2FP, N9060A-3FP, N9060A-4FP, N9060A-5FP, N9060A-6FP, N9060A-7FP, N9068A-2FP, N9068A-CFP, N9069A-AFP |
LOT 772664 | 550, DP2, EA3, EP1, FS1, FSA, LFE, LNP, MPB, NFE, NUL, P50, DFR, RTL, N9060A-2FP, N9060A-3FP, N9060A-4FP, N9060A-5FP, N9060A-6FP, N9060A-7FP, N9068A-AFP, N9068A-CFP, N9069A-AFP |
LOT 773641 | 526, DP2, EA3, EP1, FS1, FSA, LFE, LNP, NFE, NUL, P26, PFR, RTL, N9060A-3FP, N9060A-4FP, N9060A-5FP, N9060A-6FP, N9060A-7FP, N9060B-2FP, N9063A-AFP, N9068A-AFP |
LOT 775792 | 526,ALV,BIX,BIY,B25,B40,DP2,EA3,EMC,EP1,FS1,FSA,FT2,LFE,LNP,MPB,NFE,NUL,P26,PFR,RT2,RTL,YAV, N9060A: 3 to 7FP, N9060B: 2FP, N9068A: CFP, N9071A: CFP, N9073A: A to EFP, N9079A: CFP |
LOT 778754 | N9060A 2FP, 3FP, 4FP, N9068A 2FP, N9071A 2XFP, 3,XFP, N9072A 2FP, N9073A 1FP, 2FP, 3FP, N9076A 1FP, N9080A 1FP |
MPB | Microwave preselector bypass |
N9020A-B25 | Analysis bandwidth, 25 MHz |
N9060A 2 TO 7 FP | 2FP Spectrum Analyzer Measurement, 3FP Amplitude Correction and Limit Lines, 4FP TOI and Harmonics, 5FP ACP 18 Carrier, 6FP TV Trigger and IQ Analyzer Enhancement, 7FP Zero Span, Register, Trace, and Spurious Enhancements |
N9060A-2FP | Spectrum Analyzer Measurement Application |
N9060A-3FP | Amplitude correction and Limit Lines |
N9060A-4FP | TOI and Harmonics |
N9060A2-4FP | TOI and Harmonics |
N9060A2FP | Spectrum Analyzer Measurement Application |
N9060B2FR | Spectrum Analyzer Measurement Application |
N9073A-1FP | Standard-based, one-button W-CDMA measurements; supports analog baseband analysis with Option BBA (BBIQ inputs) |
N9073A-2FP | Adds HSPA measurements; requires 1FP/1TP |
N9075A-2FP | Standard-based, one-button Mobile WiMAX measurements; supports analog baseband analysis with Option BBA (BBIQ inputs) |
NFE | Noise Floor Extension |
NUL | LO/IM nulling, Minimizes the LO feed-thru and intermodulation distortion |
P03 | Preamplifier, 100 kHz to 3.6 GHz |
P08 | 8.4 GHz Preamplifier |
P50 | Preamplifier, 50 GHz |
PC4 | Upgrade to dual core processor with removable solid state drive |
PC5 | Single core 64-bit performance processor, 4GB RAM, removable SSD |
PFR | Precision frequency reference 10 MHz |
PLUS | Includes: N9060A 3 TO 7FP, N9068A 2FP, N9069A 1 AND 2FP, N9071A 2 AND 3FP, N9072A 2FP AND 2TP, N9073A 1FP, 1TP, 2 AND 3 FP, A TO DFP, N9075A 2FP, N9076A 1FP, N9077A 2FP, N9079A 1 AND 2FP, N9080A 1FP, N9082A 1FP |
PRC | Portable configuration |
RTL | Real-time link |
T03 | 9 kHz to 3 GHz Tracking Generator Frequency |
YAS | Y-axis screen video output |