리퍼비시 계측기
리퍼비시 계측기
NRP-Z21
- ModelNRP-Z21
- MakerR&S
- DescriptionAVG Power Sensor , 200 pW to 200 mW / 10 MHz to 18 GHz
- Rental문의요망
- Stock문의요망
The Power Sensors R&S NRP-Z11 and R&S NRP-Z21 fuse
multiple-path architecture, multiple-diode technology and a
simultaneously scanning multichannel measurement system
into a unique high-performance concept.
Multiple-path architecture is the combination of two or three
diode detectors to obtain a large dynamic range for modulated signals. This is achieved by operating each detector
exclusively in the square-law region and by using only the
optimally driven detectors for the measurement.
Multiple diodes comprise several zero-bias Schottky diodes
connected in series and integrated on one chip. When used
in an RF detector, they expand its square-law region, because
the measurement voltage is split among several diodes – so
that each one is driven less – while at the same time the
detected voltages of the individual diodes are added together.
- True universal power sensor for a vast number of applications
- 10 MHz to 18 GHz
- -67 dBm to +23 dBm (200 pW to 200 mW)
- 90 dB dynamic range for CW and modulated signals
- Innovative three-path diode power sensor with enhanced inter-range performance
- Continuous average, burst average, timeslot average, time gating and trace mode supported (video bandwidth 100 kHz)
- Automatic burst detection and acquisition
- Up to 1500 measurements/s (buffered mode)
- Low sensitivity to harmonics
- Intelligent plug & play USB power sensor that is fully characterized at the factory
- Operation of sensor via USB interface
- No influence of base unit on measurement accuracy
